March 31, 2025, 05:46:04 PM
« previous next »
Pages: 1 2 3 [4] 5 6 ... 15

Author Topic: Bikedads Constant Rebuild  (Read 74820 times)

Offline Rayminator

Re: Bikedads 2010 Rebuild
« Reply #45 on: March 22, 2012, 06:22:39 PM »
La Crosse Street Drags........once owned by yours truly.

Bring your junk, get spanked, and head home. Big fun.

Grille out at my Camper and drink beer, boat on the River.
Logged

Offline bikedad

Re: Bikedads 2010 Rebuild
« Reply #46 on: March 22, 2012, 06:37:30 PM »
Quote from: Rayminator on March 22, 2012, 06:22:39 PM
La Crosse Street Drags........once owned by yours truly.

Bring your junk, get spanked, and head home. Big fun.

Grille out at my Camper and drink beer, boat on the River.
Tell Pete you need to work on his FD.
We'll have a Midwest SNS!!
Logged
Don Teifke  :drive:
[smg id=8489]
"Life is tough.,, Life is even tougher if you're stupid."
-----John Wayne-----

Offline bikedad

Re: Bikedads 2010 Rebuild
« Reply #47 on: April 03, 2012, 03:54:12 PM »
I've had some people ask me how my stock RX7 clutch slave is mounted and used with my 91 V6  WC T-5.
Here are the pictures of how it's mounted. The car was swapped in 2006 and this has been the configuration since then.
The bellhousing is a stock Gen1 Part# 3858403
The clutch fork is also a stock Gen 1 Part#? that has been cut down to clear the firewall tunnel.
It handles my Centerforce Dual Friction clutch with no problems.

















Logged
Don Teifke  :drive:
[smg id=8489]
"Life is tough.,, Life is even tougher if you're stupid."
-----John Wayne-----

Offline bikedad

Re: Bikedads 2010 Rebuild
« Reply #48 on: April 15, 2012, 06:20:21 PM »
Slight update:

A few months ago Ebush was getting rid of FC GXL parts.
I wanted to buy his brand new slotted and drilled rotors. (Still in boxes) There were some other parts he had that I was interested in but would not have shipped well.
I decided to road trip to Cincinnati with my brother to pick up all his parts he was getting rid of. He said if no-one picked up these parts they were (getting scrapped)
I replaced the diff a couple of weeks ago. Today I had some time to deal with the other parts I've been wanting to replace.


Flash Lenses that looked almost new. (Mine were broken and extremely hazy)
[smg id=4463]

Front Brembo rotors with EBC Green Stuff pads (EBC are pretty noisy)
[smg id=4462]

Rear rotors (forgot what manufacture)
[smg id=4466]

Leather GXL seats compared to my SE Sport seats (I cleaned them with Lexol leather cleaner and Blue Magic conditioner and they look almost new)
These are so much nicer than my SE Sport seats. Lumbar support, nice bolster support, tilt, and tilting headrests.
[smg id=4464]

The center console is replaced with the matching one from Ebush but this picture is before I replaced it
[smg id=4465]


BTW, I have some decent but worn SE Sport seats for sale cheap if anyone is interested.

Logged
Don Teifke  :drive:
[smg id=8489]
"Life is tough.,, Life is even tougher if you're stupid."
-----John Wayne-----

Offline digitalsolo

Re: Bikedads 2010 Rebuild
« Reply #49 on: April 15, 2012, 07:01:43 PM »
Nice, Roxy is looking good.  :)
Logged
Blake MF'ing McBride
1988 Mazda RX7 - Turbo LS1/T56/ProEFI/8.8/Not Slow...   sold.
1965 Mustang Coupe - TT Coyote, TR6060, modern brakes/suspension...
2007 Aston Martin V8 Vantage - Gen V LT4/TR6060, upper/lower pullies, headers, tune.
2021 Tesla Model 3 Performance - Stock...ish.

Offline gadzooks

  • Supporting Member
  • Launching!
  • Posts: 1347
  • Got Torque?
  • View Gallery
    • View Profile
Re: Bikedads 2010 Rebuild
« Reply #50 on: April 15, 2012, 08:30:48 PM »
I'll have to stop down and see if your seats are in any better shape than mine
Logged
1987 Base/Light Weight with '95 Firebird LT1/T5

Offline screamin88

Re: Bikedads 2010 Rebuild
« Reply #51 on: April 15, 2012, 08:39:20 PM »
We can't wait for a little MN WI get together... Do we want to meet near the Twin Cities and cruise down to LaCrosse area? or just go straight to Lacrosse and bum around there... County road 108 is a must and it is 25 min from Lacrosse.. what do you think?
Logged

Offline bikedad

Re: Bikedads 2010 Rebuild
« Reply #52 on: April 15, 2012, 09:02:09 PM »
Quote from: screamin88 on April 15, 2012, 08:39:20 PM
We can't wait for a little MN WI get together... Do we want to meet near the Twin Cities and cruise down to LaCrosse area? or just go straight to Lacrosse and bum around there... County road 108 is a must and it is 25 min from Lacrosse.. what do you think?

Isn't there a Car Craft Summer Nationals that occurs in St Paul? When is that?
Logged
Don Teifke  :drive:
[smg id=8489]
"Life is tough.,, Life is even tougher if you're stupid."
-----John Wayne-----

Offline Adrenaline

Re: Bikedads 2010 Rebuild
« Reply #53 on: April 15, 2012, 10:18:21 PM »
Quote from: bikedad on April 15, 2012, 09:02:09 PM
Quote from: screamin88 on April 15, 2012, 08:39:20 PM
We can't wait for a little MN WI get together... Do we want to meet near the Twin Cities and cruise down to LaCrosse area? or just go straight to Lacrosse and bum around there... County road 108 is a must and it is 25 min from Lacrosse.. what do you think?

Isn't there a Car Craft Summer Nationals that occurs in St Paul? When is that?


July 20th-22nd

http://www.mngmp.org/forum/showthread.php?9673-So-Car-Craft-2012

http://www.carcraft.com/2012/summer_nationals/index.html
Logged
2017 Colorado Z71 - 2016 Camaro 2SS M6 - 1987 RX7 S4 T2

Offline screamin88

Re: Bikedads 2010 Rebuild
« Reply #54 on: April 15, 2012, 10:24:05 PM »
I plan on going to that with some friends and family and would be great if some Norotors peeps showed up!.. I'm thinkin we do an early Saturday meet in Prescot WI and gather at the No Name Saloon.  Cruise to LaCrosse on the old river road 35. Get food in LaCrosse somewhere and hit up hwy 108. Then we can do whatever.. part ways or hotel er whatever... I don't think there will be enough day to enjoy the river road if we do CarCraft unlees we do all that Sunday.. thoughts?
« Last Edit: April 15, 2012, 10:45:27 PM by screamin88 »
Logged

Offline spadanko

Re: Bikedads 2010 Rebuild
« Reply #55 on: April 15, 2012, 10:38:51 PM »
isnt that rear rotor on backwards???
Logged
87 FC tc78 lq4/t-56, grannys 8.8 still in surgery  :drive:
79 widebody 358sbc/th350, grannys 8.8, 150 shot
"A true hot-rodder wouldn't be content until he had created a car so violent, so hairy, so totally sick that the very act of dropping the hammer would result in instant death. Anything less results in the need to go faster." - Tony DeFeo

Offline bikedad

Re: Bikedads 2010 Rebuild
« Reply #56 on: April 16, 2012, 08:49:55 AM »
Quote from: spadanko on April 15, 2012, 10:38:51 PM
isnt that rear rotor on backwards???
Hmmm, they did have L and R labels on them. But now that you mention it I think it is on backwards. :scratch:
Logged
Don Teifke  :drive:
[smg id=8489]
"Life is tough.,, Life is even tougher if you're stupid."
-----John Wayne-----

Offline texfc

Re: Bikedads 2010 Rebuild
« Reply #57 on: April 16, 2012, 11:19:48 AM »
Don put them on that way so he could do some Jim Rockford 180s  :)
Logged
1989 GTU - 355 SBC - WC T5 - TII rear - build thread http://www.norotors.com/index.php?topic=354.msg3811#msg3811
2005 Tacoma 4x4 - daily driver
1966 Mooney M20E upgraded to 201

Offline bikedad

Re: Bikedads 2010 Rebuild
« Reply #58 on: April 16, 2012, 11:31:58 AM »
Quote from: texfc on April 16, 2012, 11:19:48 AM
Don put them on that way so he could do some Jim Rockford 180s  :)

You're showing your age man.  :D

Logged
Don Teifke  :drive:
[smg id=8489]
"Life is tough.,, Life is even tougher if you're stupid."
-----John Wayne-----

Offline texfc

Re: Bikedads 2010 Rebuild
« Reply #59 on: April 16, 2012, 12:01:32 PM »
For the youngsters here.....

Rockford Car Chase: Compilation
Logged
1989 GTU - 355 SBC - WC T5 - TII rear - build thread http://www.norotors.com/index.php?topic=354.msg3811#msg3811
2005 Tacoma 4x4 - daily driver
1966 Mooney M20E upgraded to 201
Pages: 1 2 3 [4] 5 6 ... 15
« previous next »