March 16, 2025, 02:42:48 PM

Author Topic: Connector between firewall and glovebox/ dash. Help  (Read 1677 times)

Offline strickrothp

Connector between firewall and glovebox/ dash. Help
« on: June 06, 2020, 02:07:34 AM »
I bought my car already swapped and was working around my passenger footwell area and accidentally pulled this purple wire and yellow wire out from this connector. Would anyone know which wire goes where and what they might be for?
I ran out of daylight and couldn't really troubleshoot what problem i may have caused.

Edit: NVM. After doing some research I believe this is the X-14 connector and the wires are for the coolant temp and vehicle speed sensor.
« Last Edit: June 06, 2020, 06:09:22 AM by strickrothp »

Offline Gunnytron

Re: Connector between firewall and glovebox/ dash. Help
« Reply #1 on: June 06, 2020, 10:23:52 AM »
This might help you identify and trace where they may have come from. You may just have to follow the loose wires to their source.

http://grannys.tripod.com/3C8instructions7.html

http://grannys.tripod.com/3C8instructions8.html

In any case, them falling out that easily is pretty poor workmanship.
http://www.norotors.com/index.php?topic=12880.0
FD, LS1 running 220 3.90 Trickflow heads, Comp Ultra-gold Arc 1.72 Rockers, 7.550 BTR Pushrods, BTR Stage II NA Cam 227/234 .614"/.576" 113+2, ARP Head Bolts, BTR Platinum Springs, Ported FAST 90, NW 90mm TB, FAST 60lb Injectors, Textralia Clutch/Flywheel, T56, Cobra 8.8, 31 spline, trac-loc 3.55 Diff, Holley HP EFI, Racelogic TC.

Offline Turbotronic

Re: Connector between firewall and glovebox/ dash. Help
« Reply #2 on: August 27, 2020, 04:25:38 AM »
This might help you identify and trace where they may have come from. You may just have to follow the loose wires to their source.

http://grannys.tripod.com/3C8instructions7.html

http://grannys.tripod.com/3C8instructions8.html

In any case, them falling out that easily is pretty poor workmanship.

I'm doing the wiring in my car right now. This was extremely helpful, thank you.