T56 Speed sensor pin outs?

[BNR34RB26DETT]

T56 speed sensor question. I'm using stock ecu and pin out on red side calls out for pin 20 VSS low and 21 VSS High. How should i wire up the t case ss? So I hook up the green pin 20 wire and ground the other? Pin 21 cable came cut off.

-CZeroMedia

[digitalsolo]

I take it that's a 1 wire sensor?   If so, that should work in theory.   Stock sensor is two wire, obviously.

[BNR34RB26DETT]

I take it that's a 1 wire sensor?   If so, that should work in theory.   Stock sensor is two wire, obviously.

its a two wire. im assuming one goes to VSS high and other to VSS low but im just confused as to why the purple wire is cut on the ECU side......

[digitalsolo]

They're sometimes tapped for something like a Dakota Digital.  Not sure why it'd be cut though.

[onefastrx7turbo]

Pin A on the connector is light green/black and goes to ECU pin 20. Pin B is purple/white and goes to ecu pin 21.

[BNR34RB26DETT]

Pin A on the connector is light green/black and goes to ECU pin 20. Pin B is purple/white and goes to ecu pin 21.

awesome! thank you