When is the next FD improved Strut Bar pro. Run?

[7th Heaven]

When will you guys be doing another production run for the improved Strut brace? I noticed you took the buy option off your website.

[ImprovedRacing]

They are out of stock. We don't have any plans yet but we will probably do another production run sometime soon if we can get enough interest in a Group Buy. The problem is there just isn't much of a market for them and we need to make a lot of them for it to be cost effective.

[7th Heaven]

How many people would you need for another run??

[ImprovedRacing]

Ideally, 50, but we can probably do it with 20-30. 20 is really the absolutely minimum.

We will post up a thread on Rx7Club.com soon to garner interest.

[7th Heaven]

   I'm in. Let me know.

[Tbkonwso]

can we do another run of the bars?

[ImprovedRacing]

Just FYI everyone, we DO have the bars in stock right now, BUT we don't plan to do another run of these once they are sold out.

We have just a handful left, so if you ever want to own one, I suggest buying one soon!

https://www.improvedracing.com/strut-tower-bar-and-master-cylinder-brace-for-mazda-rx-fd3s.html

[Rhino1]

Do you have any for right hand drive?

[Gunnytron]

Do you have any for right hand drive?

I think they had a closing out sale on the rhd ones a while back.

[ImprovedRacing]

Okay guys. I just checked inventory to see what we have left.

Here's what we have left:

1 x complete LHD bar with BMC brace, CLEAR ANODIZED. This is basically a matte silver bar, looks pretty cool. Would be awesome one a silver FD. $499, first come first serve.

4 x complete LHD bars with BMC brace, black anodized.

1 x complete LHD bar with BMC brace, old design, used. This was one previously installed on my car. It will however include a brand new bar, but the end plates have been installed so there are marks from the nuts, and the brace is the old design, but does work fine and is in otherwise good condition. $299 for this one.

3 x complete bars that can be LHD OR RHD. The bars have braces on BOTH sides. We don't have any more end plates without the brace on the left side of the car for RHD cars. So basically what you have to do is cut off the brace on the side you're not using. $499 each.

1 x extra bar, just the bar, no end plates. Anodized black. If anyone needs a replacement bar for some reason, here's your chance to pick one up!

[ImprovedRacing]

Update. Here's what we have left now:

1 x complete LHD bar with BMC brace, CLEAR ANODIZED. This is basically a matte silver bar, looks pretty cool. Would be awesome one a silver FD. $499.

1 x complete LHD bars with BMC brace, black anodized. $499.

3 x complete bars that can be LHD OR RHD. The bars have braces on BOTH sides. You have to do is cut off the brace on the side you're not using, or just leave the extra brace if it doesn't interfere with anything. $499 each.

Free US shipping.

[ImprovedRacing]

Hey guys, another update. This is all we have left now:

3 x complete bars that can be LHD OR RHD, black, with IR logo. The bars have braces on BOTH sides. You have to do is cut off the brace on the side you're not using, or just leave the extra brace if it doesn't interfere with anything (might interfere with ABS if you still have it).

$499 each. To sweeten the deal, we will also include an LS Swapped T-shirt and an Improved Racing Team Jacket!

[Ls2swap]

Sending you a message

[ImprovedRacing]

Hey guys, we only have TWO strut tower bars left. Both bars have the brake master cylinder brace on BOTH sides of the bar, so you can use it on LHD or RHD cars. If anyone wants to snag one, let me know! Please email us because I don't check the forum often.

[ImprovedRacing]

Just to update, we are officially completely out of stock on these strut bars, and we don't plan on making them again. If someone wanted to take on making them themselves and organizing a group buy in the future, let me know and we may consider selling you the CAD models and prints so the community can continue to have access to this part.