March 18, 2025, 05:24:48 PM

Author Topic: Couple of questions  (Read 1834 times)

Offline babillaracing

Couple of questions
« on: June 30, 2016, 09:36:54 PM »
Hi guys i got two questions
First from where you guys run your lines to use an oil cooler?

Second i need a measurement from the face of the timing chain cover to the face of the crankshaft pulley (ctsv accesories)cause i might have to chop off 1.5" of my radiator . Thanks in advance


Offline wickedrx7

Re: Couple of questions
« Reply #1 on: June 30, 2016, 10:37:51 PM »
Oil cooler- above filter. You can get everything you need from improvedracing.com.

1993 Touring, 2012 L99, T-56, Ronnin 8.8, Ohlins, Speedhut, Samberg and lots of custom parts
Build Thread - http://www.norotors.com/index.php?topic=19354.0
Pictures - www.flikr.com/wickedrx7

Offline babillaracing

Re: Couple of questions
« Reply #2 on: July 01, 2016, 09:38:28 AM »
Thanks man for the info. Thank god they have a low profile adapter if not i was going to be in deep trouble lol

I had these laying around from my 240 2j years lol


Almost no room


Offline gnx7

Re: Couple of questions
« Reply #3 on: July 01, 2016, 11:33:29 AM »
The Improved racing oil cooler adapters are very nice.  Make sure you duct that oil cooler in!  Your car is going to need it ;)
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline babillaracing

Re: Couple of questions
« Reply #4 on: July 01, 2016, 02:13:59 PM »
The Improved racing oil cooler adapters are very nice.  Make sure you duct that oil cooler in!  Your car is going to need it ;)

Thanks Mark sure will. Still need that measurement, anybody?