March 18, 2025, 01:45:17 AM

Author Topic: MSD Atomic intake manifold for LSx and FD setup  (Read 6512 times)

Offline gnx7

MSD Atomic intake manifold for LSx and FD setup
« on: June 13, 2016, 12:21:26 AM »
What is the verdict on this intake?  Ryan23 is AWOL and hasn't been on here in about 6 months.  I believe he attempted to get his to work; however didn't fully say where it wouldn't clear.  He had an LS7 setup.

Has anyone else gotten this to work on their FD swap?  Please list what engine you have and Kmember.

I have a customer with Samberg Kmember and LS7 wanting to run this; however not 100% sure on if it fits...and what is needed to make it fit.  I want to run one as well on my 441ci LS7 setup if the Vararam doesn't pan out.
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline jayv64

Re: MSD Atomic intake manifold for LSx and FD setup
« Reply #1 on: June 13, 2016, 12:58:53 AM »
I keep answering for Ryan since he doesnt show his face around here. I had his car in my garage for quite a while and it does 100% fit. His car is running the Samberg subframe. He did trim the webbing on the hood, had to clearance the firewall a little(much like the fast) and he also shaved the MSD logos off and had it hydrodipped. I am quite sure I will be at his place before the week is out, and if you need any pics, I can take them. He still has the car, but he got a new F-type R and between work and that, he has not been messing with the FD much.

Offline gnx7

Re: MSD Atomic intake manifold for LSx and FD setup
« Reply #2 on: June 13, 2016, 12:32:02 PM »
He bought a new Jag!  Lucky SOB!

Also please check what throttlebody is on it.... ie 90/92/102/105 and brand

Appreciate it!
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline jayv64

Re: MSD Atomic intake manifold for LSx and FD setup
« Reply #3 on: June 13, 2016, 01:15:27 PM »
Holley 102 the newish black one

Offline twokrx7

Re: MSD Atomic intake manifold for LSx and FD setup
« Reply #4 on: June 14, 2016, 12:33:37 AM »
pics damn it
07 Jeep SRT8 426 mid-mount turbo, 1100+awhp
14 OBM Blue CTSV sedan, 680rwhp

Offline gnx7

Re: MSD Atomic intake manifold for LSx and FD setup
« Reply #5 on: June 14, 2016, 02:16:39 AM »
I sell the MSD Atomic intake with a norotors.com discount  ;)  PM me for pricing......
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline jayv64

Re: MSD Atomic intake manifold for LSx and FD setup
« Reply #6 on: June 14, 2016, 09:38:54 AM »
[attach=1]

Offline gnx7

Re: MSD Atomic intake manifold for LSx and FD setup
« Reply #7 on: June 14, 2016, 11:01:23 PM »
Thank you!  Any pics of the underside of the hood?
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline jayv64

Re: MSD Atomic intake manifold for LSx and FD setup
« Reply #8 on: June 14, 2016, 11:20:14 PM »
I had that on my phone... I still havent gone over there... I will before the weekend is over and will take pics for you....

Offline AHarada

Re: MSD Atomic intake manifold for LSx and FD setup
« Reply #9 on: June 16, 2016, 08:42:44 PM »
This is the last I saw about the MSD.  Is this the same manifold we are talking about?
[smg id=6954]

Offline jayv64

Re: MSD Atomic intake manifold for LSx and FD setup
« Reply #10 on: June 16, 2016, 10:04:41 PM »
Yep... Same car... That is Ryan23

Offline digital_hoon

Re: MSD Atomic intake manifold for LSx and FD setup
« Reply #11 on: June 17, 2016, 09:21:21 AM »
In for pics of the hood webbing.

Tony Mamo is making some big gains after porting these things, even over a ported fast.
www.C2renders.com  - Digital marketing assets tailored to the automotive aftermarket.

'07 RS4
'93 Montego Blue FD - Mid-operation

Offline jayv64

Re: MSD Atomic intake manifold for LSx and FD setup
« Reply #12 on: June 22, 2016, 09:42:01 PM »
As Promised...... I added a pic of his Jag because its just damn nice.....
[attach=1]
[attach=2]
[attach=3]
[attach=4]
[attach=5]
[attach=6]

Offline digital_hoon

Re: MSD Atomic intake manifold for LSx and FD setup
« Reply #13 on: June 23, 2016, 08:55:56 AM »
Thanks for those pics! The mods to make it fit don't look too drastic.

Oh...and that F Type -  :cheers:
www.C2renders.com  - Digital marketing assets tailored to the automotive aftermarket.

'07 RS4
'93 Montego Blue FD - Mid-operation

Offline gnx7

Re: MSD Atomic intake manifold for LSx and FD setup
« Reply #14 on: June 27, 2016, 12:04:41 PM »
thanks for the pics!  Is that F Type British racing green
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com