March 17, 2025, 02:38:23 AM
« previous next »
Pages: [1]

Author Topic: LS2 TB ported/polished, LSA injectors, LS3 valley cover, (3) rear engine covers  (Read 5219 times)

Offline gnx7

LS2 TB ported/polished, LSA injectors, LS3 valley cover, (3) rear engine covers
« on: December 06, 2015, 02:19:45 AM »
LSA injectors 56# (fit the LS3 intake)
$200
LS7 stock heads with Ti valves.... pull offs.  It would be wise to put in new valve guides and exhaust valves as it is a common wear item
$1100/pair shipped to lower 48
LS7 rockers stock with stands
$140
externally polished LS2 DBW 90mm TB (silver blade)
$200
Internally ported LS2 GTO DBW TB
$200
LS2 front cover with sensor
$60
(3) LS2/LS3/7 rear covers
$30

These parts in the link below aren't mine; however I know Dave the seller personally for over 10 years.  He is legit and honest.
There are 6.0 shortblocks, fully built 6.0 motors with LS3 heads, tons of good stuff
http://ls1tech.com/forums/parts-classifieds/1800153-forged-long-block-aluminum-blocks-heads-turbos-lsa-blower-more.html
« Last Edit: April 23, 2016, 11:54:17 AM by gnx7 »
Logged
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline gnx7

Re: LS3 intake, LSA inj/heads, LSA supercharger, 90mm TB, LS7 heads, blocks, etc
« Reply #1 on: December 30, 2015, 11:05:48 PM »
added an LSA blower, ZL1 lid and other things
Logged
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline gnx7

Re: LS3 intake, LSA inj/heads, LSA supercharger, 90mm TB, LS7 heads, blocks, etc
« Reply #2 on: January 04, 2016, 11:16:30 PM »
LSA blower and injectors SOLD

There is going to be a fun convertible FC running around this spring!
Logged
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline gnx7

Re: LS3 intake, LSA inj/heads, LSA supercharger, 90mm TB, LS7 heads, blocks, etc
« Reply #3 on: January 15, 2016, 01:40:43 PM »
Bump
Logged
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline cyipher

  • Staged
  • Posts: 659
  • #8 On The 50 Fastest Piston Powered V8 RX7 List
  • View Gallery
    • View Profile
Re: LS3 intake, LSA inj/heads, LSA supercharger, 90mm TB, LS7 heads, blocks, etc
« Reply #4 on: January 18, 2016, 02:21:20 PM »
gen 3 or 4 ls2 pistons?
Logged

Offline gnx7

Re: LS3 intake, LSA inj/heads, LS7 heads, 90mm TB, blocks, etc
« Reply #5 on: January 20, 2016, 01:56:20 PM »
I'm guessing Gen4 since they have the Gen4 rods

updated list. 

Also will have the following in about 2 weeks:
(3) LSA longblocks (need torn down and inspected)  front/rear covers, harm balancers, valvecovers included
(1) LS9 longblock (need torn down and inspected)   prices still TBD.... but we aren't giving it away.
Logged
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline gnx7

Re: LS3 intake, LSA heads, LS7 heads, 90mm TB, blocks, etc
« Reply #6 on: February 10, 2016, 11:15:27 AM »
to the top..... put some LSA 56# injectors back on the list
Logged
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline nick Ritter

  • Staged
  • Posts: 322
  • it works 100% of the time 50% of the time
  • View Gallery
    • View Profile
Re: LS3 intake, LSA heads, LS7 heads, 90mm TB, blocks, etc
« Reply #7 on: February 11, 2016, 05:00:56 PM »
priice on ls3 intake and rail shipped to 55102 ?
Logged

Offline gnx7

Re: LS3 intake, LSA heads, LS7 heads, 90mm TB, blocks, etc
« Reply #8 on: February 19, 2016, 12:43:50 PM »
LS2 block and pistons/rods sold

these don't have superchargers:
LS9 shortblock $5K
LSA longblock $4500
Logged
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline gnx7

Re: LS3 intake, LSA heads, LS7 heads, 90mm TB, blocks, etc
« Reply #9 on: February 22, 2016, 12:08:13 PM »
1 pair of LS9 stock heads tested good $1100 plus shipping (no rockers/stands.... they take LS3/L92 style rockers/stands)
These have Ti intake valves which are crazy light. 

These are rotocast and are made of a superior grade aluminum like the LSA heads over the Mexico cast LS3/L92 heads.  The Ti valves themselves are about $100/each

LS3 intake sold
« Last Edit: February 24, 2016, 12:32:36 PM by gnx7 »
Logged
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline gnx7

Re: LS3 intake, LSA heads, LS9 heads, LS7 heads, 90mm TB, blocks, etc
« Reply #10 on: March 03, 2016, 12:28:59 PM »
March bump to the top
Logged
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline gnx7

Re: LS3 intake, LSA heads, LS9 heads, LS7 heads, 90mm TB, blocks, etc
« Reply #11 on: March 17, 2016, 12:51:30 PM »
to the top!
Logged
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline gnx7

Re: LSA/LS9/LS7 heads, misc engine parts
« Reply #12 on: March 31, 2016, 01:12:41 AM »
LSA heads sold
price lowered in LS9 heads
added GTO ported LS2 TB
« Last Edit: April 01, 2016, 10:48:42 AM by gnx7 »
Logged
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com

Offline gnx7

Re: LS2 TB ported/polished, LSA injectors, LS3 valley cover, (3) rear engine covers
« Reply #13 on: April 23, 2016, 11:54:38 AM »
LS9 heads sold
Logged
'93 FD: 441ci/AllPro LS7 heads/intake en route, T56 Mag, 8.8" IRS, HolleyHP, DavisTechTC 10.32@137mph cats/full exhaust. 165mph 1/2 mile (old LS7)
'93 FD LS9 turbo, T56 Mag, Samberg 8.8" solid axle, 9.35@163mph 197mph 1/2 mile
`69 Chevelle: alum 5.3, GTS76 turbo, ChiseledPerf A/W, T56 Magnum,Ford 35 spline 9".CTS-V interior http://www.norotors.com/index.php?topic=18234.0
old yellar....440rwhp/FD sold but not forgotten: http://www.ponycars.net/scc.htm
I sell new T56 Magnums/McLeod clutch/T56 rebuild kits/Holley EFI/FIC injectors and all BrianTooleyRacing parts.  norcalmotorsport@gmail.com
Pages: [1]
« previous next »