March 17, 2025, 04:26:59 PM

Author Topic: Improved Racing Scratch & Dent/Clearance Sale  (Read 3915 times)

Offline ImprovedRacing

Improved Racing Scratch & Dent/Clearance Sale
« on: August 25, 2015, 02:29:46 PM »
We are selling several scratch and dent or returned open-box items and odd-sized pieces of hose at 50% off the price on our website. Message us if interested. Parts are first come first serve (based on private messages) Visit improvedracing.com for more product information.

Parts

(1x) FSM-185       High-Flow Engine Oil Cooler Thermostat, 185F (minor scratches and dent in corner)
(5x) FSM-215       High-Flow Engine Oil Cooler Thermostat, 215F (laser engraving errors, otherwise brand new)
(1x) EGM-106       Low-Profile Oil Cooler Adapter for LS Engines (minor scratching)
(1x) EGM-107       Oil Cooler Adapter for LS1, LS2 GTO / Commodore / Monaro (dent on adapter)
(2x) EGM-116       Oil Accumulator Adapter for LS Engines (Both open-box returns in good condition)
(1x) ENV-150        Dual Inline Oil Sensor Manifold Block (moderate scratching on one side from installation)
(1x) SLN-125        Lightweight Hard Anodized Aluminum Racing Lug Nuts, M12x1.25 (Minor wrench damage from previous installation) - 75% off on this one
(1x) SLN-150        Lightweight Hard Anodized Aluminum Racing Lug Nuts, M12x1.50 (Engraving mistakes and extras)
(2x) DF-120-10     RaceFlux AN 120-Degree Double Swivel Seal Hose End Fitting, -10AN (both open-box returns in good condition)
(1x) DF-120-12     RaceFlux AN 120-Degree Double Swivel Seal Hose End Fitting, -12AN (open-box return in good condition)
(1x) OM-08-10      RaceFlux AN to O-Ring Adapter Fitting (minor scratching, O-Ring in good condition)

[attachimg=1]

Hose

Hose piece lengths are in parenthesis.

(142 in, 62 in)         AHL-06      Lightweight Racing Hose, not for fuel, -06AN
(26 in)                     AHL-08      Lightweight Racing Hose, not for fuel, -08AN
(33 in)                     HS2-10      RaceFlux 5/8" ID Aluminized Kevlar Velcro Hose Sleeve
(66 in, 16 in)           FC3-10      Aeroquip Stainless Steel Braided Hose, -10AN
(15 in, 37 in, 77 in) AHL-10      Lightweight Racing Hose, not for fuel, -10AN
(57 in)                     FBU1000    Aeroquip Startlite Lightweight Racing Hose, -10AN
(33 in)                     HS1-12      3/4" ID -10AN Fire-Retardant Silicone Fiberglass Hose Sleeve
(209 in)                   AHL-12       Lightweight Racing Hose, not for fuel, -12AN
(81 in, 98 in)           FBU1200    Aeroquip Startlite Lightweight Racing Hose, -12AN
(30 in)                     HS2-14      RaceFlux 7/8" ID Aluminized Kevlar Velcro Hose Sleeve

[attachimg=2]
« Last Edit: September 09, 2015, 11:59:07 AM by ImprovedRacing »
Michael


Improved Racing Products
Tel (407) 705-3054

Offline wickedrx7

Re: Improved Racing Scratch & Dent/Clearance Sale
« Reply #1 on: August 25, 2015, 03:42:52 PM »
I was hoping you would have a catchcan setup in your scratch and debt sale... oh wait you haven't released a catchcan setup yet.  :poke:

1993 Touring, 2012 L99, T-56, Ronnin 8.8, Ohlins, Speedhut, Samberg and lots of custom parts
Build Thread - http://www.norotors.com/index.php?topic=19354.0
Pictures - www.flikr.com/wickedrx7

Offline piglet

Re: Improved Racing Scratch & Dent/Clearance Sale
« Reply #2 on: August 25, 2015, 05:20:10 PM »
how much for (1x) SLN-150        Lightweight Hard Anodized Aluminum Racing Lug Nuts, M12x1.50 (Label engraving mistakes and extras)?

Offline ImprovedRacing

Re: Improved Racing Scratch & Dent/Clearance Sale
« Reply #3 on: August 25, 2015, 06:58:46 PM »
how much for (1x) SLN-150        Lightweight Hard Anodized Aluminum Racing Lug Nuts, M12x1.50 (Label engraving mistakes and extras)?

Everything is 50% off the regular price, so $45.00
Michael


Improved Racing Products
Tel (407) 705-3054

Offline ak1ra07

Re: Improved Racing Scratch & Dent/Clearance Sale
« Reply #4 on: August 25, 2015, 09:05:59 PM »
If I'm swapping a GTO motor into an FD, which do I want:

(1x) EGM-106       Low-Profile Oil Cooler Adapter for LS Engines (minor scratching)
(1x) EGM-107       Oil Cooler Adapter for LS1, LS2 GTO / Commodore / Monaro (dent on adapter)

Offline Sandmaster

Re: Improved Racing Scratch & Dent/Clearance Sale
« Reply #5 on: August 25, 2015, 11:29:18 PM »
If I'm swapping a GTO motor into an FD, which do I want:

(1x) EGM-106       Low-Profile Oil Cooler Adapter for LS Engines (minor scratching)
(1x) EGM-107       Oil Cooler Adapter for LS1, LS2 GTO / Commodore / Monaro (dent on adapter)

It's based off of which oil pan you're going with so you would want the EGM-106. The EGM-106 is used on 'most' rear sump applications like the F-Body pan, while the EGM-107 setup is for the front-sump pan. That's the short and quick answer but if you have specific questions Improved Racing can answer them for you.  ;)

I was hoping you would have a catchcan setup in your scratch and debt sale... oh wait you haven't released a catchcan setup yet.  :poke:

 :cheers:

Offline ImprovedRacing

Re: Improved Racing Scratch & Dent/Clearance Sale
« Reply #6 on: August 26, 2015, 01:43:40 PM »
^ Correct.

EGM-106 is tentatively sold. Updated the original list.
Michael


Improved Racing Products
Tel (407) 705-3054

Offline ImprovedRacing

Re: Improved Racing Scratch & Dent/Clearance Sale
« Reply #7 on: August 28, 2015, 11:27:30 AM »
Looks like we still have the scratch & dent lug nuts available. They are in good shape, a couple just have very light marks from the wrong socket being used. PM us if you want them!
Michael


Improved Racing Products
Tel (407) 705-3054

Offline 1320king

Re: Improved Racing Scratch & Dent/Clearance Sale
« Reply #8 on: August 28, 2015, 02:07:02 PM »
ill take these items
(33 in)                     HS1-12      3/4" ID -10AN Fire-Retardant Silicone Fiberglass Hose Sleeve
(33 in)                     HS2-10      RaceFlux 5/8" ID Aluminized Kevlar Velcro Hose Sleeve
(30 in)                     HS2-14      RaceFlux 7/8" ID Aluminized Kevlar Velcro Hose Sleeve

i have bought from you before and love this stuff. Please give me a shipped price 06840 zip code
« Last Edit: August 28, 2015, 02:21:33 PM by ImprovedRacing »

Offline ImprovedRacing

Re: Improved Racing Scratch & Dent/Clearance Sale
« Reply #9 on: August 28, 2015, 02:20:32 PM »
ill take these items
(33 in)                     HS1-12      3/4" ID -10AN Fire-Retardant Silicone Fiberglass Hose Sleeve
(33 in)                     HS2-10      RaceFlux 5/8" ID Aluminized Kevlar Velcro Hose Sleeve
(30 in)                     HS2-14      RaceFlux 7/8" ID Aluminized Kevlar Velcro Hose Sleeve

i have bought from you before and love this stuff. Please give me a shipped price 06840 zip code

Awesome, PM me with your email address.
Michael


Improved Racing Products
Tel (407) 705-3054

Offline ImprovedRacing

Re: Improved Racing Scratch & Dent/Clearance Sale
« Reply #10 on: September 01, 2015, 11:27:22 AM »
List updated.
Michael


Improved Racing Products
Tel (407) 705-3054

Offline 1320king

Re: Improved Racing Scratch & Dent/Clearance Sale
« Reply #11 on: September 01, 2015, 12:38:01 PM »
Guys these prices are SICK. His products are awesome, thank you again!

Offline ImprovedRacing

Re: Improved Racing Scratch & Dent/Clearance Sale
« Reply #12 on: September 10, 2015, 03:14:00 PM »
List updated. Still some stuff left.
Michael


Improved Racing Products
Tel (407) 705-3054