March 15, 2025, 03:02:43 AM
« previous next »
Pages: 1 2 3 [4]

Author Topic: 351 into a 87 Rx7 luxury Build thread ...now for sale  (Read 14827 times)

Offline Ffjosh

Re: 351 into a 87 Rx7 luxury Build thread
« Reply #45 on: September 17, 2015, 10:34:12 PM »
Reverse rotation water pump = we have issues with using a 6 rib pulley.

Fix

T5 getting together


Mechanical fuel pump



Also installed the headers valve covers etc.

Also the guy before me painted it red...now it's faded to chevy orange  :punch:
« Last Edit: September 18, 2015, 07:17:55 AM by Ffjosh »
Logged

Offline Skervey

Re: 351 into a 87 Rx7 luxury Build thread
« Reply #46 on: September 30, 2015, 03:50:15 PM »
Progress looks good! Can I ask why you are running a mechanical fuel pump and not using the in tank pump? With a electric fuel pump you can have it cut on before you go to start the car so if its been sitting for a while you don't have to run the starter for a while till the float bowls fill up. Just my thoughts on it!

Keep us posted with progress!

Logged

Offline Ffjosh

Re: 351 into a 87 Rx7 luxury Build thread
« Reply #47 on: September 30, 2015, 08:25:31 PM »
I'm going with a fuel cell not using the stock tank.

It keeps it simple is the main reason why.

No issue with cranking it for a min imo. Honesty I've never known it to take that long after a car has been sitting.

Progress is stalled at the moment. It's getting cold out so fire wood and getting the shop cleaned up is priority
Logged

Offline Orracle

Re: 351 into a 87 Rx7 luxury Build thread
« Reply #48 on: October 02, 2015, 09:07:12 PM »
Nice build man, I got 87 base with a 5.0 and a t5 with a carb. Let me know if you got any questions, I've had it running for about a year and a half now  :cheers:
Logged

Offline digitalsolo

Re: 351 into a 87 Rx7 luxury Build thread
« Reply #49 on: October 03, 2015, 08:41:18 AM »
Good progress!
Logged
Blake MF'ing McBride
1988 Mazda RX7 - Turbo LS1/T56/ProEFI/8.8/Not Slow...   sold.
1965 Mustang Coupe - TT Coyote, TR6060, modern brakes/suspension...
2007 Aston Martin V8 Vantage - Gen V LT4/TR6060, upper/lower pullies, headers, tune.
2021 Tesla Model 3 Performance - Stock...ish.

Offline Ffjosh

Re: 351 into a 87 Rx7 luxury Build thread
« Reply #50 on: October 03, 2015, 10:10:35 AM »
Thanks guys it's getting there.

Will do orracle
Logged

Offline Skervey

Re: 351 into a 87 Rx7 luxury Build thread
« Reply #51 on: October 07, 2015, 09:16:26 AM »
Orracle- do you have any issues with heat under the hood? I have aftermarket headers, edelbrock performer intake and edelbrock carb and im boiling the gas...

Don't mean to hijack your thread but there is just so much heat under there!
Logged

Offline Orracle

Re: 351 into a 87 Rx7 luxury Build thread
« Reply #52 on: October 07, 2015, 01:32:14 PM »
I don't have any issues with heat.  I put too big of an aluminum radiator in it so it takes awhile to even get warm.  Also I have a big hole in the hood to clear the air cleaner so that helps to.

I'll see if I can get some pics later today.
Logged

Offline Ffjosh

Re: 351 into a 87 Rx7 luxury Build thread
« Reply #53 on: October 07, 2015, 04:21:42 PM »
No problem on the thread jack. I like the Info as well
Logged

Offline Skervey

Re: 351 into a 87 Rx7 luxury Build thread
« Reply #54 on: October 07, 2015, 04:22:46 PM »
Thanks I have a large after market rad to and the motor heat is not the isue it the fuel getting hot in the carb causing vapor lock. A hole in the hood would probably fix my issues but then everyone will know its a v8 car so its not a option.  :secret:
Logged

Offline Ffjosh

Re: 351 into a 87 Rx7 luxury Build thread ...now for sale
« Reply #55 on: December 07, 2015, 08:47:27 PM »
Car is for sale.

Expecting my 2nd kid and am looking at sti's.

$3k obo for all of it.

Will make a legit for sale thread later.

Logged
Pages: 1 2 3 [4]
« previous next »