March 18, 2025, 08:56:05 AM

Author Topic: New Member/Vendor - Broadfield Customs  (Read 6684 times)

Offline Broadfield

New Member/Vendor - Broadfield Customs
« on: March 25, 2014, 08:44:03 PM »
I joined a couple of years ago and I'm pretty sure I never made an intro thread.  So since I just became a vendor here, I would like to take this time to kill two birds with one stone!

My name is Toby Broadfield.  I'm the owner/fabricator of Broadfield Customs.  I specialize in retrofitting gauges/electronics into interior trim panels and gauge clusters.  My style is the OEM look... like it could of came from the factory that way.  Every piece I make is one-off custom.  The customer and I go over how they want it, I may make some suggestions, then I make it happen.  I'm also an authorized Speedhut dealer... which makes for a one-stop-shop.  I have not had the pleasure to do much in the Mazda world, but I'm always trying to expand my vehicle-type offerings... which is why I'm here.

http://www.broadfieldcustoms.com/
https://www.facebook.com/BroadfieldCustoms
http://instagram.com/broadfieldcustoms
http://broadfield.wordpress.com/
https://twitter.com/TobyBroadfield


Here are some samples of my work:


















Offline Broadfield

Re: New Member/Vendor - Broadfield Customs
« Reply #1 on: March 25, 2014, 08:58:10 PM »
.... and I'm not only a vendor, I'm also an enthusiast.  I own a 1992 Nissan 240sx that is an ongoing canvas for me.  This is how it sat a couple years ago:















And now it's getting an LS3, shaved/filled engine bay, tucked everything and so on.  I have been on hold with the car for the past 1-1/2 years due to really pushing my Broadfield Customs brand.  Once everything settles I'm hoping to get it finished up ASAP.








Offline digitalsolo

Re: New Member/Vendor - Broadfield Customs
« Reply #2 on: March 25, 2014, 09:03:55 PM »
Absolutely beautiful work Toby, both on your interior work and your 240.
Blake MF'ing McBride
1988 Mazda RX7 - Turbo LS1/T56/ProEFI/8.8/Not Slow...   sold.
1965 Mustang Coupe - TT Coyote, TR6060, modern brakes/suspension...
2007 Aston Martin V8 Vantage - Gen V LT4/TR6060, upper/lower pullies, headers, tune.
2021 Tesla Model 3 Performance - Stock...ish.

Offline NOROTOR

Re: New Member/Vendor - Broadfield Customs
« Reply #3 on: March 26, 2014, 08:51:38 AM »
That 240 is doooope! Welcome, I'll be following your work.

Jesse
-Jesse White-
1988 GTU

Offline Broadfield

Re: New Member/Vendor - Broadfield Customs
« Reply #4 on: March 26, 2014, 11:05:51 AM »
Thanks guys!  I'll be posting up a for sale thread in my vendor section hopefully within the next couple of days.

Offline paul_3rdgen

Re: New Member/Vendor - Broadfield Customs
« Reply #5 on: March 26, 2014, 11:38:20 AM »
I'm not a fan of 240's but WOW!!! great work and attention to detail. :cheers:  I'm sure you will do well here.....good service and communication are key.
93 RX7 R1 500rwhp
LS2, H/C combo... ARE drysump
Race Logic traction Control and 4 wheel Stoptech BBK
3.73 gears installed in the stock diff  :o

Offline gc3

Re: New Member/Vendor - Broadfield Customs
« Reply #6 on: March 26, 2014, 11:52:24 AM »
dem wiggins!

looks good!

Offline Ruler_Mark

Re: New Member/Vendor - Broadfield Customs
« Reply #7 on: March 26, 2014, 02:03:25 PM »
don't let spacevomit see those fittings
93 Digicar

Offline Adam P

Re: New Member/Vendor - Broadfield Customs
« Reply #8 on: March 26, 2014, 05:12:56 PM »
don't let spacevomit see those fittings
LOLZ

Offline spacevomit

Re: New Member/Vendor - Broadfield Customs
« Reply #9 on: March 26, 2014, 06:14:59 PM »
No, let me see!

Offline Bowtie7

Re: New Member/Vendor - Broadfield Customs
« Reply #10 on: March 26, 2014, 07:48:52 PM »
Truly sharp work. Attention to every detail is so cool to see. I really like the coil relocation.
I do love what I do!

Offline Bryrich

Re: New Member/Vendor - Broadfield Customs
« Reply #11 on: March 26, 2014, 10:24:19 PM »
Checked out ur site looks like quality stuff. For future reference what would a fc gauge cluster run. With just a tach, speedo and maybe one small gauge prob fuel run

Offline Broadfield

Re: New Member/Vendor - Broadfield Customs
« Reply #12 on: March 27, 2014, 09:39:42 AM »
Checked out ur site looks like quality stuff. For future reference what would a fc gauge cluster run. With just a tach, speedo and maybe one small gauge prob fuel run

With Speedhut, you have so many choices to get the same overall result, that it's hard to just quote a price.  If you want 4" gauges as your mains... then around $650 all said and done.  That includes the gauges, the cluster fabrication etc.  If you want 3-3/8" gauges as your mains, then obviously less.  Then it depends on what options you want within each of those gauges... GPS speedo or standard, shift lights on the tach, warning light on the fuel level etc.

Offline GEAUX FAST

Re: New Member/Vendor - Broadfield Customs
« Reply #13 on: March 27, 2014, 10:18:54 AM »
Nice work! I always admire someone who has attention to detail because its a quality I just don't have!

Offline mefarri

Re: New Member/Vendor - Broadfield Customs
« Reply #14 on: March 27, 2014, 10:31:24 AM »
I forgot about your 240 build.  So clean.  I used to check in on your site from time to time.
"I'm not sure what your intent was because I don't speak "dumbshit", but next time, start your own thread. "

-Jimlab

"Otherwise it looks like something I can build over a weekend, if I spent the first day watching TV."

-Blake motherfucking McBride