who here has done a 4 link rear in FC

[SEDUCE]

hey guys i am looking at doing a 4 link rear chassis clip in my FC.
Just wondering who has done one
This is what i am looking at going with
http://www.mcdonaldbrosracing.com.au/4link.html

[screamin88]

Digitalsolo, ScottieGNZ, and RX-V8 did a triangulated 4-link in their FC's.  I rode/drove RX-V8's car and it was awesome!  We plan on making a triangulated 4-link kit using Fox body Mustang control arms and axle housings.  Should be a nice kit when they are done.

[GuillaumeC]

We plan on making a triangulated 4-link kit using Fox body Mustang control arms and axle housings.  Should be a nice kit when they are done.

For the FC? When do you think this kit will be available?

[screamin88]

As soon as my broke ass can afford and axle and parts to build a prototype... Lol

[SuperSlow]

1badimport and JUGGIN have true four links (if thats what they are called).

JUGGIN
http://www.norotors.com/index.php?topic=3839.0

Also, it might help to look at mine and wannabefast's build threads. Not four links but our pics should help you out.

[screamin88]

1badimport car is backhalfed like the kit you are thinking of.. I believe that car has been dipping into the 7s...

[SEDUCE]

Nice work 1badimport, had a look at your car. Couldnt find a build thread but a for sale one with little pics of rear end.
Congrats on the build looks tidy and goes hard.

[1320king]

Check my 4 link thread. thinking of possibly making a triangulated 4 link kit.

[jax04]

As soon as i get the chance, i'll post some pics of mine, its A LOT like Blakes though.

[Grumpy]

As soon as i get the chance, i'll post some pics of mine, its A LOT like Blakes though.

any pics of Blakes ???

[BeasTT]

Digitalsolo. Tons in his build thread

[jax04]

http://www.norotors.com/index.php?topic=1667.900

[Grumpy]

http://www.norotors.com/index.php?topic=1667.900

Thanks !!!! I was at page 12 last night. That made it really easy.  Ok I did something like Blake's .  Used a stock Mustang rear end with stock replacement lower control arms and adjustable ones on the top. Ill start a new thread with my pics.

[1320king]

can we make a sticky with 4 link pics.  .  Also our 4 link project got sidlined for now. We went to go install the piece we made, couldnt plumb bob or square the rear end for nothing....... Previous owner of the rear end we have had axle tubes welded and they are bowed, that and its wider by 1" on one side (measuring from upper control arm ears to outside flange). Has 9" ends and either it was made to be offset in his car or the place that did it messed up.

[SuperSlow]

^When I sent my housing to Moser they called and asked if I wanted it offset or centered, said something about how some cars are like that stock. Was kind of thrown off by it but I guess its common enough  ?