March 15, 2025, 03:33:10 AM
« previous next »
Pages: 1 2 [3] 4 5

Author Topic: 4G63 FD  (Read 30106 times)

Offline Ls1-fd

Re: 4G63 FD
« Reply #30 on: January 05, 2013, 04:15:13 PM »
Nice car, I like this swap.
Logged
Turbo LS9 RX7

Offline Bean4g63

Re: 4G63 FD
« Reply #31 on: January 05, 2013, 06:28:01 PM »
Quote from: Ls1-fd on January 05, 2013, 04:15:13 PM
Nice car, I like this swap.

Thank You.
Logged

Offline twokrx7

Re: 4G63 FD
« Reply #32 on: January 05, 2013, 11:10:24 PM »
Awesome, love the setup!  Good luck with the stock rx7 trans, I hope it holds up to your future power goals.

:cheers:
Logged
07 Jeep SRT8 426 mid-mount turbo, 1100+awhp
14 OBM Blue CTSV sedan, 680rwhp

Offline Bean4g63

Re: 4G63 FD
« Reply #33 on: January 06, 2013, 01:02:32 PM »
Quote from: twokrx7 on January 05, 2013, 11:10:24 PM
Awesome, love the setup!  Good luck with the stock rx7 trans, I hope it holds up to your future power goals.

:cheers:

Thanks.  From everyone I have talked to about it it will not be an issue for the power I am making.  I make 360ft-lbs at peak tq so the stock trans should be able to hold up to that.  There are plenty of 500-600whp stock trans RX7's around.  I kept the stock trans since it will shift at 9000+ rpm and they are cheap to buy.  I picked up a JDM 5 speed for $250 and that is in the car now.  I will rebuild the one I have and keep it on the shelf for when this one breaks.
Logged

Offline Jordan Innovations

  • Supporting Member
  • Top Fuel
  • Posts: 2954
  • Competition Mil-spec wiring/electronics since 2005
  • View Gallery
    • View Profile
    • Jordan Innovations
Re: 4G63 FD
« Reply #34 on: January 06, 2013, 08:43:18 PM »
After doing Andrew Brilliant's 2G Eclipse time attack car, I've had HEAPS of respect for these engines.  That dyno curve looks great, and having an 'overbuilt' engine is not a terrible thing lol.  I love communities (4G63 and LSx among them) where 500whp is scoffed at lol.
Logged

Offline rk970

Re: 4G63 FD
« Reply #35 on: January 07, 2013, 01:03:18 AM »
Is your paint a custom mix color? If not could you tell me what it is. 
Logged

Offline Bean4g63

Re: 4G63 FD
« Reply #36 on: January 08, 2013, 09:36:29 PM »
Quote from: rk970 on January 07, 2013, 01:03:18 AM
Is your paint a custom mix color? If not could you tell me what it is.

Is Carbon Grey Metallic from a Porsche Panamera.
Logged

Offline Bean4g63

Re: 4G63 FD
« Reply #37 on: January 08, 2013, 09:40:36 PM »
Quote from: Jordan Innovations on January 06, 2013, 08:43:18 PM
After doing Andrew Brilliant's 2G Eclipse time attack car, I've had HEAPS of respect for these engines.  That dyno curve looks great, and having an 'overbuilt' engine is not a terrible thing lol.  I love communities (4G63 and LSx among them) where 500whp is scoffed at lol.

They are great motors.  550-600whp is really the norm on straight pump gas these days.  Its crazy.  We just made 918whp on E85 on my buddys Evo VIII with a PTE6766 turbo and a stock computer..  That car made 600whp@18psi.  Its a beast on the street.  Its got PS, AC, etc.
Logged

Offline SOB Racing

Re: 4G63 FD
« Reply #38 on: January 12, 2013, 11:08:09 PM »
Hey Bean....how did you center the trans on the adapter plate/flywheel   You can't use a dial indicator on the bellhousing like I planned.   Did you just let the trans center on the pilot bearing and drill your mounting holes? 
Logged
1987 RX7  4G63T Swap with 20G 11.50@122.7
1985 944 Pending a 4g63T Swap

1992 Eagle Talon TSI Retired
12.27 @ 111 on 14B
12.27 @ 113.9 on Small !6g
SOB Racing   "Sitting On Blocks"
2006 HHR "The Hearse" Lowered

Offline Bean4g63

Re: 4G63 FD
« Reply #39 on: January 14, 2013, 10:41:44 PM »
Quote from: SOB Racing on January 12, 2013, 11:08:09 PM
Hey Bean....how did you center the trans on the adapter plate/flywheel   You can't use a dial indicator on the bellhousing like I planned.   Did you just let the trans center on the pilot bearing and drill your mounting holes?

My machinist did the adapter plate so I am not sure how he did it.  I gave him a block, 6bolt starter plate, and the b2600 bell housing, he took care of the rest. 
Logged

Offline SOB Racing

Re: 4G63 FD
« Reply #40 on: January 15, 2013, 08:36:39 AM »
Quote from: Bean4g63 on January 14, 2013, 10:41:44 PM
Quote from: SOB Racing on January 12, 2013, 11:08:09 PM
Hey Bean....how did you center the trans on the adapter plate/flywheel   You can't use a dial indicator on the bellhousing like I planned.   Did you just let the trans center on the pilot bearing and drill your mounting holes?

My machinist did the adapter plate so I am not sure how he did it.  I gave him a block, 6bolt starter plate, and the b2600 bell housing, he took care of the rest.

Welll hell, that's cheating!
Logged
1987 RX7  4G63T Swap with 20G 11.50@122.7
1985 944 Pending a 4g63T Swap

1992 Eagle Talon TSI Retired
12.27 @ 111 on 14B
12.27 @ 113.9 on Small !6g
SOB Racing   "Sitting On Blocks"
2006 HHR "The Hearse" Lowered

Offline Adam P

Re: 4G63 FD
« Reply #41 on: January 15, 2013, 02:17:58 PM »
were you the one that was sticking this in a IS300 like a year or 2 ago?
Logged

Offline SOB Racing

Re: 4G63 FD
« Reply #42 on: January 15, 2013, 02:28:25 PM »
Quote from: Adam P on January 15, 2013, 02:17:58 PM
were you the one that was sticking this in a IS300 like a year or 2 ago?

Me or Bean?   If me, nope.
Logged
1987 RX7  4G63T Swap with 20G 11.50@122.7
1985 944 Pending a 4g63T Swap

1992 Eagle Talon TSI Retired
12.27 @ 111 on 14B
12.27 @ 113.9 on Small !6g
SOB Racing   "Sitting On Blocks"
2006 HHR "The Hearse" Lowered

Offline Adam P

Re: 4G63 FD
« Reply #43 on: January 15, 2013, 06:35:55 PM »
Bean LOL
Logged

Offline Bean4g63

Re: 4G63 FD
« Reply #44 on: January 15, 2013, 11:09:36 PM »
Quote from: Adam P on January 15, 2013, 02:17:58 PM
were you the one that was sticking this in a IS300 like a year or 2 ago?

No, not me. 
Logged
Pages: 1 2 [3] 4 5
« previous next »