March 26, 2025, 11:35:56 PM
« previous next »
Pages: [1]

Author Topic: LS2 longblock compatable with LS1 parts?  (Read 1753 times)

Offline chemicool

LS2 longblock compatable with LS1 parts?
« on: November 30, 2010, 11:54:00 PM »
Hey guys.  I am fairly new to LS motors but as I understand it, LS1 and LS2 parts are interchangeable right?  LS3 was fairly different?  I am looking to buy an LS2 longblock to replace a damaged LS1 longblock and as an upgrade rather than repair.  Thoughts?
Logged

Offline Pez

Re: LS2 longblock compatable with LS1 parts?
« Reply #1 on: December 01, 2010, 12:45:10 AM »
The 24x/2x reluctor LS2s are pretty easy to swap in place of an LS1.  If it has 58x/4x reluctors, then you have to swap those, which requires removing the crank.  I've done it a few times, not that hard, just time consuming.  BTW, the LS2 you sent me the link to has a 24x/2x reluctor.
Logged
FC/FD plug and play wiring harnesses, LSx swap AC systems, LSx swap power steering lines.

Offline digitalsolo

Re: LS2 longblock compatable with LS1 parts?
« Reply #2 on: December 01, 2010, 10:19:35 AM »
Of note, Lingenfelter has a 24x/2x to 58x/4x (and vice versa I believe) adapter box.
Logged
Blake MF'ing McBride
1988 Mazda RX7 - Turbo LS1/T56/ProEFI/8.8/Not Slow...   sold.
1965 Mustang Coupe - TT Coyote, TR6060, modern brakes/suspension...
2007 Aston Martin V8 Vantage - Gen V LT4/TR6060, upper/lower pullies, headers, tune.
2021 Tesla Model 3 Performance - Stock...ish.

Offline Andrew R

  • Supporting Member
  • Launching!
  • Posts: 1270
  • Superunnatural
  • View Gallery
    • View Profile
Re: LS2 longblock compatable with LS1 parts?
« Reply #3 on: December 01, 2010, 12:31:40 PM »
Quote from: digitalsolo on December 01, 2010, 10:19:35 AM
Of note, Lingenfelter has a 24x/2x to 58x/4x (and vice versa I believe) adapter box.

my buddy is using it with no issues
Logged
Pages: [1]
« previous next »