Need Advice 93 Rx7 Pulls To The Left Really Bad

[whitemike2686]

Took to a different shop. He put on a alignment machine and also said the front lower control arm is bent and needs replaced. Other then Ebay and other places to find a used control arm? 

[quinns]

The swaybar brackets are known to bend on these cars from the research I've done. I'd straighten the mounts so your not wearing out swaybar end links.

If you're looking for a used control arm I'd pay attention to the classifieds section on here and the club. I priced out new ones and they most definitely aren't cheap.

[spacevomit]

It is probably the 5.3.  Iron blocks tend to add too much weight to these Mazdas.  Often they twist the frame when accelerating, and bend control arms when braking...

LMFAO, very likely. (He's kidding, for the sarcasm-impaired).