LS3 Cable Driven Throttle Body Question

[SmogSUX]

I had an LS1, swapping in an LS3, so I'm using LS1 PCM and stuff. Anyways here's where I'm at...I got a Chinese cable driven TB and a bracket (bracket instructions say it's compatible with Lokar cables), but my cable I was using on the LS1 seems to be too short. There's a shorter setting that I can put the ferrule, but it doesn't go in all the way and leaves the cable bent...can I just buy a Lokar cable and call it good?

[Tomo]

Seems like you just need to drill through for the locator peg to sit correctly. I don't see any specific problem using that cable location as long as you get full TB movement with the pedal.