1
Parts WTB / Re: Inner cv joint for OEM turbo II axle
« on: April 28, 2015, 10:39:55 AM »
I just picked up a full pair of axles, but thanks for the response 
March 19, 2025, 01:22:17 AM
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Parts WTB / Inner cv joint for OEM turbo II axle
« on: April 11, 2015, 04:56:56 PM »
Looking for the inner cv joint for a turbo II axle to mate with the OEM diff. Anyone with the Ronin 8.8 kit that scavenged the outer joints from a TII axle have the inner cv joint laying around? Let me know, thanks!
3
Fabrication / Re: ls3/ls7 maf hole cover
« on: June 27, 2014, 09:45:53 PM »
^^^ Awesome!
I've got an LS3 intake so I'm going to have him print up a plug to glue in the silencer tube too. I'll post that file here once I finalize the dimensions.
I've got an LS3 intake so I'm going to have him print up a plug to glue in the silencer tube too. I'll post that file here once I finalize the dimensions.
4
Fabrication / Re: ls3/ls7 maf hole cover
« on: June 27, 2014, 03:00:56 PM »
Orion - would you be willing to share an IGES/STP/"other universal cad format" file of that MAF plug? I was thinking about fabricating a plug but this looks like a much cleaner option that I could have my buddy with a printer crank out for me.
5
Parts for Sale / Re: good bye lsx fc part out :( bc racing turbo2 brand new parts
« on: June 27, 2014, 02:50:40 PM »
What's your price on the hood shock kit shipped to 07035?
6
Parts for Sale / Re: Wrecked my car Part Out Sale
« on: April 17, 2014, 01:32:22 PM »
Did anyone scoop up the 5 lug rear calipers from you yet? Saw a lot of interest in them over the winter but didn't see them mentioned as sold.
7
Parts WTB / Re: WTB: F-Body LS1 Power Steering pump
« on: February 25, 2014, 10:27:19 AM »
I bought Joel's GTO pump. Feel free to lock this thread.
Thanks again!
Thanks again!
8
Parts WTB / WTB: F-Body LS1 Power Steering pump
« on: February 19, 2014, 01:23:47 PM »
I'm looking for an F-body LS1 power steering pump with mount. PM me if you've got one to sell.
Thanks
Thanks
9
Parts for Sale / Re: FS: CCW Classics 5x114.3 -- 17x10 +11 / 17x11 +11
« on: December 27, 2013, 08:06:59 AM »
Sold sold sold!
Mods, feel free to lock it up!
Mods, feel free to lock it up!
10
Parts for Sale / Re: FS: CCW Classics 5x114.3 -- 17x10 +11 / 17x11 +11
« on: December 18, 2013, 09:17:06 AM »Would changing the lips get them down to 9 or 9.5?
Yeah, CCW sells inner and outer barrels for $225 each
So, you could turn these into pretty much whatever spec you wanted.
http://shop.ccwheel.com/modular-wheel-parts/17-rim-shells/
11
Parts for Sale / Re: FS: CCW Classics 5x114.3 -- 17x10 +11 / 17x11 +11
« on: December 15, 2013, 09:34:54 PM »
Bump! Found a set of wheels I'd like to pick up... these have got to go. $1750
12
Parts for Sale / Re: FS: CCW Classics 5x114.3 -- 17x10 +11 / 17x11 +11
« on: December 10, 2013, 10:58:50 AM »
Posted these on Zilvia for $1900, price has been updated here too.
Thanks for looking!
Thanks for looking!
13
Parts for Sale / FS: CCW Classics 5x114.3 -- 17x10 +11 / 17x11 +11
« on: December 05, 2013, 09:30:14 PM »
I mostly lurk on here and don't post much (I spend most of my time in the drift section over on the club, S/N Schmitty over there if you want to look at my trader score)... but I'm looking to sell my set of CCW Classics:
Flat black face with polished outer lips
17x10 +11mm offset (5-15/16" back spacing)
17x11 +11mm offset (6-7/16" back spacing)
5x114.3 PCD
Race hardware, swissed faces, and no center caps
No curb rash, no bends, no cracks
Outer lips are hand polished and look decent but could use a machine polish to really pop! There are a few scratches and nicks here and there from use, but overall these wheels are in great condition.
These came off my widebody road race FC and are perfect for the Ronin/Tri-point engineering widebody, but could probably be stuffed under more conservative over-fenders with a set of stretched tires. I ran 285/40/17s in the front and 335/35/17s in the rear. I've since turned the car into a drift car and these are just too nice to beat up on a drift car.
Asking $1750. I'd prefer to sell these locally and am willing to meet up with potential buyers within a reasonable distance of Wayne, NJ, but I can ship these wheels too if the right offer comes along.
Local buyers are welcome to the 285s/335s... they are older Michelin Pilot Sports with ~1/2 to 3/4 tread.
PM me with any questions or requests for more/better pics.
Wheel 1 (17x10)
Wheel 2 (17x10)
Wheel 3 (17x11)
Wheel 4 (17x11)
17x10s
17x11s
Worst of the scratch/ nicks
Pictures on the car:
Flat black face with polished outer lips
17x10 +11mm offset (5-15/16" back spacing)
17x11 +11mm offset (6-7/16" back spacing)
5x114.3 PCD
Race hardware, swissed faces, and no center caps
No curb rash, no bends, no cracks
Outer lips are hand polished and look decent but could use a machine polish to really pop! There are a few scratches and nicks here and there from use, but overall these wheels are in great condition.
These came off my widebody road race FC and are perfect for the Ronin/Tri-point engineering widebody, but could probably be stuffed under more conservative over-fenders with a set of stretched tires. I ran 285/40/17s in the front and 335/35/17s in the rear. I've since turned the car into a drift car and these are just too nice to beat up on a drift car.
Asking $1750. I'd prefer to sell these locally and am willing to meet up with potential buyers within a reasonable distance of Wayne, NJ, but I can ship these wheels too if the right offer comes along.
Local buyers are welcome to the 285s/335s... they are older Michelin Pilot Sports with ~1/2 to 3/4 tread.
PM me with any questions or requests for more/better pics.
Wheel 1 (17x10)
Wheel 2 (17x10)
Wheel 3 (17x11)
Wheel 4 (17x11)
17x10s
17x11s
Worst of the scratch/ nicks
Pictures on the car:
14
Build Threads / Re: Forged LS1 Rx7 FC "Going the extra distance from the ground up !"
« on: June 20, 2013, 01:49:46 PM »Sorry guys I have been slacking on keeping this build thread updated ! I have been busy busy busy.
I have a few pictures of what I have done lately ,
I decided to paint the switch panel , the same as my engine bay and steering wheel.
That paint on the switch panel looks so awesome! I'm digging the look of the engine bay too!
15
General Tech / Re: trailer hitch anchor points on FC
« on: February 04, 2013, 03:27:42 PM »id tie into the bumper anchor points
when i did my parachute that is about the sturdiest area back there imo
That's what I was planning to do before I ran short on time and ended up getting the pre-made hitch. I was envisioning a tubular bumper beam replacement that had a drop tube to accept a "hidden-hitch" style receiver.