1
Suspension/Brakes/Wheels / Re: Electric power steering
« on: December 15, 2016, 07:41:16 PM »
Vue's are definitely full electric. A lot available cheap because of timing chain and A/T trouble. It would be interesting to see one done.
March 15, 2025, 11:50:56 PM
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
Drivetrain / Re: Ksport coil overs. Spring rates.
« on: June 30, 2015, 04:02:03 PM »
Call them - they were great when I went stiffer on the FC
3
Events / Re: BIR proving grounds 2015
« on: June 30, 2015, 03:44:00 PM »
Plans changed at the last minute. Sorry we missed it BIR is a great track. Hoping we can make it to the fall event. Congratulations on a great win
4
Events / Re: BIR proving grounds 2015
« on: June 18, 2015, 11:24:45 PM »
Shorttrack and Cman will be at the road course on Saturday
5
General Tech / Re: ls FC radiator setups
« on: September 26, 2014, 03:02:32 PM »
27 x 20 Dual Pass Speedway Motors radiator - OE Camaro dual fan Never any cooling issues
6
Suspension/Brakes/Wheels / Re: FC maxed out on BC coilovers showing only .5 camber????
« on: May 12, 2014, 08:44:56 PM »
I need the empty hole to be on the inside to get max camber. Are you sure you have the slotted hole on the lower mount of the coilover maxed out ?
7
Parts for Sale / Re: Genuine Spirit R Red Recaros
« on: November 04, 2013, 06:29:08 PM »
I can't view the club post because I don't have 10 posts.
8
Drivetrain / Re: What is this crap on my oil cooler?
« on: August 27, 2013, 06:38:14 PM »http://www.flaretite.com/index.php
repair seal for an/jic fittings
DD
Great find Just what I need for an AN12 with a scratch - Thanks
9
Drivetrain / Re: Ls1 rear main seal write up ?
« on: July 19, 2013, 06:35:18 PM »So why must it go on dry? The GM service manual lists that it should, but is there any reason? I installed mine the same way I install them on every other car Ive ever worked on - dry on the OD and with a bit of grease on the ID. Haven't had a single drop of oil come out of it.
I wondered that too but I didn't want to be the guy to find out.
10
Drivetrain / Re: Do Powerbond make non-overdrive pulleys?
« on: July 06, 2013, 09:31:14 AM »
The Performance Products looks nice and is SFI-approved The power Bond is not approved although I think they have one that is
11
Drivetrain / Re: Do Powerbond make non-overdrive pulleys?
« on: July 05, 2013, 07:06:15 PM »
I have a Professional Products # 80032 damper from Summit - good price and no trouble
12
Interior/Exterior / Re: Trying to figure out what I did wrong with painting?
« on: June 27, 2013, 02:50:53 PM »
What kind of paint are you using. If it is a basecoat it will not have any gloss until you clear coat it If it is a single stage paint the correct reducer and hardener are important
13
Events / Re: MAP proving grounds
« on: June 24, 2013, 08:02:15 PM »Had a great time with Zac and Megan, also with David and Nikki. Caught a ride with Steve around the road course which was my favorite part of the weekend. It was fun meeting Jerel as well. Met Dave and his ls1 FC but he tossed a rod bearing to end his day at the road course. I also won a trophy and 200 bucks in gift certificates. Car ran 12.20 @ 111.9 with a 1.67 60' on motor, can't complain about that with a JY 5.3 cam only and a full interior FC... Good weekend.
Congratulations a trophy and certificates is better than a broken car. It was great meeting everyone. Looking forward to the fall event already.
Dave
14
Events / Re: MAP proving grounds
« on: June 08, 2013, 11:40:39 AM »
Will be at the road course both days. Looking forward to seeing the repaved sections of the track
15
General Tech / Re: Is the power steering cooler line really needed?
« on: March 24, 2013, 09:06:37 PM »
I ran track days with an F-Body pump wo/cooler last year. The steel pressure line got so hot it melted wire loom running next to it