1
General Tech / Re: Did you drop in your motor / trans together?
« on: June 20, 2013, 01:30:53 AM »
Best way IMO -I removed he the front rad support so it want right in... 
March 16, 2025, 03:42:07 PM
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
2
The Lounge / Just curious... anyone here end up with my car -or parts from it?
« on: June 20, 2013, 01:16:49 AM »
[smg id=5939 type=full align=center caption="22077 1103082877178 8134467 n jpg"]
87 base
LS2 swapped
4 speed T-101 dogbox
RPS Clutch
OSG/TII rear
Full aeromotive fuel system with Bosch 044 pump
RPF1 wheels
Sumped fuel tank
Stance coilvers and tons of arms/busgings
Pez Mount Kit
Howe Radiator
Fal 3500cfm fan
K&N carbon air filter
-the list goes on and on...
Last I saw her she was banged up a little: [smg id=5935 type=full align=center caption="268248 241717385854274 3819045 n jpg"]
The car was basically stolen a while back.
[smg id=5936 type=full align=center caption="228631 1517983049423 4265539 n jpg"]
[smg id=5937 type=full align=center caption="19577 1129727623280 6093879 n jpg"]
[smg id=5938 type=full align=center caption="19577 1129729383324 7680101 n jpg"]
3
The Lounge / Re: Some Recent Tattoos
« on: February 17, 2013, 06:27:32 AM »Looks good man! was that when it was fresh?
Yeah that was right after the session -it healed REALLY fast.
5
Drivetrain / Re: First Start LS1 NIGHTMARE!!!!
« on: February 04, 2013, 07:07:43 AM »ouch man... my first start resulted in catastrophic failure as well... not fun.Really what happened with yours?
Aluminum oxide blasting material in the oil pan seems to have been the culprit -however during the rebuild I found a oil control plug that was shot -either way -I lost ALL the bearings and oil pressure after about 20 min of running it.
6
Drivetrain / Re: First Start LS1 NIGHTMARE!!!!
« on: February 03, 2013, 01:19:33 PM »
ouch man... my first start resulted in catastrophic failure as well... not fun.
8
Suspension/Brakes/Wheels / Re: 315 tires on FC
« on: February 03, 2013, 12:31:44 PM »
I ran them with a 50mm flare -Stance coilovers, 17x10.5 RPF1 +17 and a 20mm spacer... there was still tons of room (thanks flares).
might be a pic in my build thread.
might be a pic in my build thread.
9
Parts for Sale / Re: 5x114 17x10.5/ 17x12 Work Equips Orlando
« on: January 29, 2013, 11:06:01 PM »
Nice wheels -good price...
LOVE Equips...
GLWS
LOVE Equips...
GLWS
11
Fabrication / Re: Not sure what I think of this dual exhaust.
« on: January 09, 2013, 10:19:22 PM »
12
The Lounge / Re: Anything going on in Orlando this Sat? 1-12
« on: January 08, 2013, 09:48:00 PM »Not into checking out the sceneAwesome!, but if you want you can drop by my place, hang for a while and we can go grab a bite to eat. Maybe I can rustle up some of the 7 locals, but have never been able to before.
PM me contact info I'll hit you up... turns out there is a drifting event at CFRC Sat as well...
I met up with Scottie a couple years ago when I was in Orlando. He was building the 2JZ Mustang at the time. It was right after he crumpled the 2JZ RX7. Great guy.
He stopped by my shop a few years back when I was building the FC
13
The Lounge / Re: Anything going on in Orlando this Sat? 1-12
« on: January 08, 2013, 06:31:45 PM »Not into checking out the sceneAwesome!
PM me contact info I'll hit you up... turns out there is a drifting event at CFRC Sat as well...
14
Electronics / Re: Power board with relays
« on: January 08, 2013, 06:17:57 AM »
my build thread....
or here is a few
or here is a few
15
The Lounge / Anything going on in Orlando this Sat? 1-12
« on: January 07, 2013, 09:36:31 PM »
I'm going to be in FL for work and I have basically all Sat free...
Looking to check out the FL scene a little or just grab a bite to eat -anything.
Looking to check out the FL scene a little or just grab a bite to eat -anything.