NoRotors.com - RX7 Engine Swap Forum
Classifieds => Parts for Sale => Topic started by: nuimpykid on June 17, 2015, 07:29:33 PM
-
EVERYTHING MUST GO REASONABLE OFFERS ACCEPTED!!
Updated List below!! PICS https://flic.kr/s/aHskeg6uoq
All Items are Plus Shipping unless noted otherwise!
LARGE ITEMS prefer pickup!
Reasonable offers accepted. Car has been gone, tired of having this stuff laying around.
Screamin 88/Ronin Mounts - 225 Shipped
Fiberglass T2 "Replica" Hood, Good condition White 100$
Wiperless Hatch 50
S5 Tails 150
A Few Random Interior Pieces, cluster or 2 (1 riced out) Grab bag. 50 for all
Black Dash (Minus Triangle vents and door) 75
Black Carpet 50
Door seals/Gaskets 40
F/R Sway Bars 75
Black Door panels that I recovered the insert 50
Large Greddy FMIC 235
Metallic Copper Powdercoated FC Spares and FD wheels, 1 Was beat with a mallet under the powder.
Never been installed since coating. Like to get some money out of them $250
Greddy Profec B with solenoid/Wiring Worked Great $75
10 AE Bronze Door Glass 200
3 Inch Exhaust 125 (Pick up only!)
10 ae White Fuel door 15
Apexi DECS Tach and shift-light 125
-
Location?
Cusco lower bar with mounts $125, is the a front bar?
Corbeau Seats $300 PICKUP (May ship but going to be expensive) do they mount to the fc floor?
any pics of the wing installed?
Will you sell just the wideband gauge?
How much for the carbon fiber middle square box (middle console) and momo rear ebrake handle. https://www.flickr.com/photos/46425151@N08/18904444285/in/album-72157654604214172/ (https://www.flickr.com/photos/46425151@N08/18904444285/in/album-72157654604214172/)
https://www.flickr.com/photos/46425151@N08/18907314781/in/album-72157654604214172/ (https://www.flickr.com/photos/46425151@N08/18907314781/in/album-72157654604214172/)
https://www.flickr.com/photos/46425151@N08/18718348389/in/album-72157654604214172/ (https://www.flickr.com/photos/46425151@N08/18718348389/in/album-72157654604214172/) what are these blue covers for?
what brand is the roll bar? price?
would you just sell the passenger lower control arm?
-
I see some interior parts and some seat belt stuff in your pics... If you have any of these, I'd be interested:
Driver and pass seatbelts in black
Upper and lower B Pillar interior plastics in black
Basically any parts needed for a manual belt swap except the A pillar plastics.
Also thinking about the Nardi... Could you let me know the wheel diameter?
-
Interior Mirror Triangle panels to 13036?
-
Location? Findlay Ohio 45840
Cusco lower bar with mounts $125, is the a front bar? Yes this is a front bar
Corbeau Seats $300 PICKUP (May ship but going to be expensive) do they mount to the fc floor? They are mounted on Stock sliders
any pics of the wing installed? Wing is a Mariah Motorsports Mode Six Aero Wing.
(https://c1.staticflickr.com/9/8614/16570256479_f3c261b218.jpg) (https://flic.kr/p/rffTXe)0308151238a (https://flic.kr/p/rffTXe) by nuimpykid1 (https://www.flickr.com/photos/46425151@N08/), on Flickr
Will you sell just the wideband gauge? Comes with sensor, $100.
How much for the carbon fiber middle square box (middle console) and momo rear ebrake handle. Its only an overlay, hopefully I didnt excite you too much! How about 50$ shipped
https://www.flickr.com/photos/46425151@N08/18904444285/in/album-72157654604214172/ (https://www.flickr.com/photos/46425151@N08/18904444285/in/album-72157654604214172/)
https://www.flickr.com/photos/46425151@N08/18907314781/in/album-72157654604214172/ (https://www.flickr.com/photos/46425151@N08/18907314781/in/album-72157654604214172/)
https://www.flickr.com/photos/46425151@N08/18718348389/in/album-72157654604214172/ (https://www.flickr.com/photos/46425151@N08/18718348389/in/album-72157654604214172/) what are these blue covers for? Cooling panel for above radiator. It is just multiple pictures of 1.
what brand is the roll bar? price? I dont know brand. I had it powdercoated wrinkle black and it never made it back into the car. 4 point. Pick up only, $250
would you just sell the passenger lower control arm? Would like to sell as a pair, Sounds like we need to take this to the PM!
-
I see some interior parts and some seat belt stuff in your pics... If you have any of these, I'd be interested:
Driver and pass seatbelts in black Belts are pending
Upper and lower B Pillar interior plastics in black I believe I have these.
Basically any parts needed for a manual belt swap except the A pillar plastics.
Also thinking about the Nardi... Could you let me know the wheel diameter? Looks like 360ish MM
Interior Mirror Triangle panels to 13036? 15$
-
Pm sent on tein efdc, how many miles on them
-
What's your price for the wing shipped to 98292
-
I will have to take measurements and see what the cost looks like to ship.
Thanks,
Bill
-
The Tein Flex, I am not 100% sure on mileage, I put less than 5k on them, Previous owner I am unsure. I would guess probably somewhere around the same.
SOLD
Headliner
Sunroof panel
Hood cable
Carpet around e brake
Rear view mirror
Sun visors
Defrost vents
Side/tower carpet
Bins
Coat hanger clips
Fasteners
Mirror Triangles
Cluster Surround
Seatbelts
-
Removed to avoid confusion
-
Did not see a pic of the Driveshaft. Is it steel or AL? What company built it?
-
Screamin88/ "Ronin" Mounts Picture! (Mounts are Pre-Ronin AFAIK)
(https://c2.staticflickr.com/6/5462/18631568099_9408b7472a_z.jpg) (https://flic.kr/p/uopE5K)IMG_1620 (https://flic.kr/p/uopE5K) by nuimpykid1 (https://www.flickr.com/photos/46425151@N08/), on Flickr
-
Bump bump bump.. Bump bump bump it up! :gruffy:
I am serious when I say everything must go. I want all this stuff gone before school starts.
I also have a nice T2 white hood with molded scoop and a Rear wiperless hatch with defrost (Normal Non 10 AE glass). How about 150 for the hood, and 100 for the glass.
-
I pm'd you on the coilovers
-
Atli126,
I Pm'd you on the 20th. Hopefully you received it. I will resend!
Thanks
-
Bumpski.
Buy some mounts. Driveshaft is pending.
Grannies and Screamin 88 mounts still available!
If anyone is on the way to cleveland, I will be heading that way tonight and can bring more parts. Let me know asap!
Would like to get rid of the seats and roll bar!
-
Coilovers pending to me
-
^ Truth ^ :cheers:
FC 2000 Bumper, rear bumper, Seats, A Pillars, Driveshaft, Fuel Tank Plate, Roll bar all are gone!
-
I need a box of seals if you'll ship. PM sent.
-
Rear subframe, rear 5 lug setup, front control arms, are gone!
-
Coilovers and taillights, hatch shocks for to me!
-
Yep yep! :cheers:
Grannies setup pending! :drive:
Who else needs some parts?
-
Your doing well on this part out!
-
It was a good weekend! You helped with it.. haha! Was nice to meet you coltboostin! :cheers:
Shitty drive though.. :banghead:
-
Grannies Kit is gone!
Up next, Screamin 88/ Ronin Mounts..
Who wants them? Rent me your Russian Mail Order Bride for a week? That should suffice.. :halo:
-
I correct my self, both kits are pending as of now.
Thanks!
-
Diff, Axles, Spoiler, front 5 lug, ecu kick panel are pending
-
Got the Tein flex installed today! Thanks again!
-
did you ever ship out the hatch shocks? :lurk:
-
In the mail! :cheers:
I imagine you will have today or tomorrow.
-
ok thanks and bump for a good guy and fast shipper, dropped the car off yesterday to get it corner balanced and aligned for autox this weekend!
-
what all is left did the lower control arms sell? I think I still want the front sway bar but I gotta wait a while for that... :drive:
-
Lower control arms did sell.
I will have to take an inventory and see what all I have to get rid of yet.
Sway bar is here with your name on it!
-
:bacon:
-
:bacon:
-
Sup with that wing? Price???
-
Wing is goneeeee! :gruffy:
-
Received the hatch shocks today! Thanks again!
-
what all is still left?
-
Fiberglass T2 hood in good shape, Wiperless hatch, 10ae door glass, standard door glass, 3 inch exhaust, Few random interior pieces. Will get some pics tonight! :cheers:
-
All prices are for local pick up only unless otherwise noted. If shipping is required, it will vary depending on buyers location!
Pics in first post!
Reasonable offers accepted. Car has been gone, tired of having this stuff laying around.
Screamin 88/Ronin Mounts - 225 Shipped
Fiberglass T2 "Replica" Hood, Good condition White 100$ PU ONLY
Wiperless Hatch 50 PU ONLY
S5 Tails 180 shipped
A Few Random Interior Pieces, cluster or 2 (1 riced out) Grab bag. 50
Black Dash (Minus Triangle vents and door) 75
Black Carpet 50
Door seals/Gaskets 40
F/R Sway Bars 75
Black Door panels that I recovered the insert 50
Large Greddy FMIC 200
Metallic Copper Powdercoated FC Spares and FD wheels, 1 Was beat with a mallet under the powder.
Never been installed since coating. Like to get some money out of them $200
Greddy Profec B with solenoid/Wiring Worked Great $90 shipped
10 AE Bronze Door Glass 200 PU Only, unless you are paying UPS store to pack up and ship.
3 Inch Exhaust 125 (Pick up only!)
10 ae White Fuel door 15
Apexi DECS Tach and shift-light 100
-
still have the hood? and are you willing to ship?
-
I do still have it.
Shipping possible, but you must be willing to pay, and be patient. I will have to find box, modify etc etc.. Last time I shipped a big box, it was a royal pain in my ass. That was with a headliner and a whole bunch of other parts.
I can probably get a hood box from an auto-body place, but the question is will UPS take it or not. I'm thinking probably not.
If you are willing to pay, be patient, and maybe help with finding a suitable shipper, then we can probably make it work.
-
FYI: you do not have any Ronin parts for sale as far as I know. We are not affiliated with Screamin's effort.
-Joel
-
where are you located?
-
Findlay Ohio, 45840
-
FYI: you do not have any Ronin parts for sale as far as I know. We are not affiliated with Screamin's effort.
-Joel
Sorry for any confusion. These mounts are Screamin88.
They were purchased in February used "Mock Up Only" from a member on here, and then I proceeded to let them sit on my carpet for some months as I ended up parting my car. They look new, as I have had them sitting for 10 months.
They include the Mounts, Pedestals, and biscuits.
-
Great seller I bought the Tein flex and other misc bits from him!
-
Can u do $150 for the mounts?
-
No. To get the other option (Ronin), for what I have included, you will be in for $400. My price is more than fair, considering everything is like new.
-
Alright I wasn't trying to lowball or anything but when screamin88 originally made and sold them they were 125 shipped so just curious as to y the price went up.
-
Cool guy and great seller. If you still have them tail lights in a few weeks I may snatch them up too. Oh, you still have that Wil Wood master cylinder?
-
Tail lights are spoken for.....
-
Cool guy and great seller. If you still have them tail lights in a few weeks I may snatch them up too. Oh, you still have that Wil Wood master cylinder?
Thanks for the bump! Yes it is still sitting here. Still need it?
Tail lights are spoken for.....
Cool has dibs tail lights, pending payment.
-
Alright I wasn't trying to lowball or anything but when screamin88 originally made and sold them they were 125 shipped so just curious as to y the price went up.
You have not been able to buy from Screamin88 for a while as far as I know. And see explanation above. These are also powdercoated black.
-
:bacon: Bump
-
Updated.
Had the tail lights and door panels not go through, not Cool's Fault. I was quoted $130+ to ship the door panels. Not sure how you guys have shipped, but I don't see how it is feasible at my price.
No longer willing to ship large items at all. Unless you are paying the UPS store to box it up and its out of my hands. Otherwise it is a losing proposition for me.
All prices are for local pick up only unless otherwise noted. If shipping is required, it will vary depending on buyers location!
Pics in first post!
Reasonable offers accepted.
Just really need someone to come and get what I have left for a deal. The more you get, the cheaper it will be. It will be worth your time i'm sure!
Screamin 88/Ronin Mounts - 225 Shipped
Fiberglass T2 "Replica" Hood, Good condition White 100$ PU ONLY
Wiperless Hatch 50 PU ONLY
S5 Tails 180 shipped
A Few Random Interior Pieces, cluster or 2 (1 riced out) Grab bag. 50
Black Dash (Minus Triangle vents and door) 75 PU Only
Black Carpet 50 PU Only
Door seals/Gaskets 40
F/R Sway Bars 75
Black Door panels that I recovered the insert 50
Large Greddy FMIC 200
Metallic Copper Powdercoated FC Spares and FD wheels, 1 Was beat with a mallet under the powder.
Never been installed since coating. Like to get some money out of them $200
Greddy Profec B with solenoid/Wiring Worked Great $90 shipped
10 AE Bronze Door Glass 200 PU Only, unless you are paying UPS store to pack up and ship.
3 Inch Exhaust 125 (Pick up only!)
10 ae White Fuel door 15
Apexi DECS Tach and shift-light 100
-
Yeah unfortunately shipping the door panels became a giant hassle. Seller is a great communicator and very honest. I really wish we could have worked something out.
Anybody travelling between Findlay Ohio and central Illinois willing to haul some door panels?
-
Buy my stuff
-
S5 Tails sold.
Buy stuff!
-
PM sent.
-
Screamin88 Mounts sold!
I do have a Wilwood Master Available, brand new. shaft has already been modified (Cut Down). 70$ shipped
I think I do have the adaptor as well.
-
Hey if you still have it by Thursday I'll buy it. Will you still sell it for the price we talked about in person?
-
Sure thing!
I pm'd you, 3 times.... My bad! :yay: :chug: :chug:
-
Pm sent on wheels
-
Replied and
Updated list below
Fiberglass T2 "Replica" Hood, Good condition White 100$ PU ONLY
Wiperless Hatch 50 PU ONLY
S5 Tails sold
A Few Random Interior Pieces, cluster or 2 (1 riced out) Grab bag. sold
Black Dash (Minus Triangle vents and door) 75 PU Only
Black Carpet sold
Door seals/Gaskets 40
F/R Sway Bars 75
Black Door panels that I recovered the insert 50
Large Greddy FMIC sold
Metallic Copper Powdercoated FC Spares and FD wheels, 1 Was beat with a mallet under the powder.
Never been installed since coating. Like to get some money out of them $200
Greddy Profec B with solenoid/Wiring Worked Great- bye
10 AE Bronze Door Glass 200 PU Only, unless you are paying UPS store to pack up and ship.
3 Inch Exhaust 125 (Pick up only!)
10 ae White Fuel door 15
Apexi DECS Tach and shift-light 100
-
Few things left. Someone come and pick this stuff up. :gruffy:
Fiberglass T2 "Replica" Hood, Good condition White 100$ PU ONLY
Wiperless Hatch 50 PU ONLY
Black Dash (Minus Triangle vents and door) 75 PU Only
F/R Sway Bars 75
Black Door panels that I recovered the insert 50
Metallic Copper Powdercoated FC Spares and FD wheels, 1 Was beat with a mallet under the powder.
Never been installed since coating. Like to get some money out of them $200
10 AE Bronze Door Glass 200 PU Only, unless you are paying UPS store to pack up and ship.
3 Inch Exhaust 100 (Pick up only!)
Apexi DECS Tach and shift-light (Wired into cluster harness included) 75