NoRotors.com - RX7 Engine Swap Forum
Technical Information => Electronics => Topic started by: awd-rwd racer on February 19, 2015, 09:56:16 PM
-
my oil pressure and coolant gauges in my cluster are dead. i have after market ones hooked up. im about to pull my cluster to fix my dead odometer issue. i figured since i was pulling the cluster out anyway, its a good time to replace my dead gauges with working ones. (aftermarket). would just removing the gauges change the way anything else works? dont know if it would disrupt a power or ground circuit.
ive searched threads where people replaced gauges with aftermarket, i just didnt see any info on this. thanks!
Im aware that it wont just be a drop in swap. Just wanna know if removing the 2 factory gauges, if it will disrupt any other circuits.