NoRotors.com - RX7 Engine Swap Forum
Technical Information => General Tech => Topic started by: gear_grinder on September 25, 2014, 01:22:10 PM
-
I'm having a hard time figuring out what kind of radiator and mounting setup i want to run on my car, post pictures of yours so i can see what i like!
-
Decide what kind of intake you want to do, and also if you want AC or not and start working from there. There is a lot of room at the front of an FC, so you just have to plan ahead and decide what accessories and intake you need/want and then get a radiator that will fit in the space you have left. The Corvette airbridge seems to be useful to keep things simple and allows you to run a vertical radiator, which makes mouting a condenser for AC easier. Check out Steve's (CMan) setup here with the Corvette airbridge.
http://www.norotors.com/index.php?topic=13733.0 (http://www.norotors.com/index.php?topic=13733.0)
Mine uses a Howe dual pass radiator and a Spal dual 11 inch fan setup. I can give you the part numbers if you are interested. The radiator is laid down and mounts to the framerails. There is also lower bracket to give support to the radiator so it is not pulling on the air filter panel. A 4 inch tube is used for the intake. I did it this way for use on the track, and it works great. I don't run AC however.
(http://i15.photobucket.com/albums/a386/largeorangefont/C3B66461-AAEA-4450-8103-34CD1E44F549-6555-000005FAAE8DD7C6_zpsba96985c.jpg)
(http://i15.photobucket.com/albums/a386/largeorangefont/0107F3D4-72B1-45D7-9FD3-9445B59925AB-6555-000005FA9AEF918C_zps49e58409.jpg)
From the front
(http://i15.photobucket.com/albums/a386/largeorangefont/IMG_1377_zpsd5efe87d.jpg)
-
I wanted to maintain the stock hood latch so it's a bit tighter.
(http://i113.photobucket.com/albums/n229/greencactus3/IMG_791220628520238_zps672be7be.jpeg)
-
27.5x15.5 radiator and a aftermarket corvette air bridge.
-
27x20 Dual Pass FSR Radiator
Lincoln Mark VIII fan
(http://i247.photobucket.com/albums/gg150/jbob1979/photobucket-18964-1378578000785_zpse675b7fe.jpg) (http://s247.photobucket.com/user/jbob1979/media/photobucket-18964-1378578000785_zpse675b7fe.jpg.html)
(http://i247.photobucket.com/albums/gg150/jbob1979/photobucket-33216-1378577738969_zps7743f299.jpg) (http://s247.photobucket.com/user/jbob1979/media/photobucket-33216-1378577738969_zps7743f299.jpg.html)
(http://i247.photobucket.com/albums/gg150/jbob1979/photobucket-19738-1378577637217_zps3e98a2bb.jpg) (http://s247.photobucket.com/user/jbob1979/media/photobucket-19738-1378577637217_zps3e98a2bb.jpg.html)
-
(http://i152.photobucket.com/albums/s167/rotary1307cc/DSC02132_zps963000b1.jpg) (http://s152.photobucket.com/user/rotary1307cc/media/DSC02132_zps963000b1.jpg.html)
(http://i152.photobucket.com/albums/s167/rotary1307cc/IMG_20140713_202329_438_zps471139f9.jpg) (http://s152.photobucket.com/user/rotary1307cc/media/IMG_20140713_202329_438_zps471139f9.jpg.html)
Custom Howe. Dual fan as if it was made for the core
-
Ash/Joel have OTR (over the radiator) setups which is your best bet for power N/A. I would strongly recommend trying to accomplish that if possible.
-
26x14 PRC made, dual 12 spal's
(https://www.norotors.com/gallery/albums/LS_FC_TRACK_BUILD/Dir_3/medium_4470.jpg) (https://www.norotors.com/index.php?action=gallery;sa=view;id=4470)
(https://www.norotors.com/gallery/albums/LS_FC_TRACK_BUILD/Dir_4/medium_4936.jpg) (https://www.norotors.com/index.php?action=gallery;sa=view;id=4936)
-
27 x 20 Dual Pass Speedway Motors radiator - OE Camaro dual fan Never any cooling issues
-
wow this thread is great... sticky??
-
JTR (Jagsthatrun.com) FC3S set up that uses C4 Corvette OEM radiator. Fits nice and I have zero cooling issues for street use.
(http://i721.photobucket.com/albums/ww213/FC3SMurray/MOMScalander005.jpg)
(http://i721.photobucket.com/albums/ww213/FC3SMurray/MOMScalander007.jpg)
(http://i721.photobucket.com/albums/ww213/FC3SMurray/MOMScalander008.jpg)
This is the clearance from your water pump (using PEZ mounts) to the Taurus Fan.
(http://i721.photobucket.com/albums/ww213/FC3SMurray/0009.jpg)
(http://i721.photobucket.com/albums/ww213/FC3SMurray/0007.jpg)
What it looks like all buttoned up and finished
(http://i721.photobucket.com/albums/ww213/FC3SMurray/march18funday185_zps41f26aca.jpg)
(http://i721.photobucket.com/albums/ww213/FC3SMurray/march18funday192x_zps63d03033-1_zpscc812165.jpg)
-
Here is my setup. It hasn't overheated yet; however I just got it running a couples week ago and it's only been in 80's around here. I'm using the same setup that Berto did: monte carlo radiator and a single speed Fiero fan that is setup to come on around 190'.
(http://i183.photobucket.com/albums/x315/Maelstorn/Mobile%20Uploads/0929141253_zps7ft3fmyf.jpg) (http://s183.photobucket.com/user/Maelstorn/media/Mobile%20Uploads/0929141253_zps7ft3fmyf.jpg.html)
(http://i183.photobucket.com/albums/x315/Maelstorn/Mobile%20Uploads/0929141253a_zpshxlrxoju.jpg) (http://s183.photobucket.com/user/Maelstorn/media/Mobile%20Uploads/0929141253a_zpshxlrxoju.jpg.html)
(http://i183.photobucket.com/albums/x315/Maelstorn/Mobile%20Uploads/0929141252a_zpsofq11en3.jpg) (http://s183.photobucket.com/user/Maelstorn/media/Mobile%20Uploads/0929141252a_zpsofq11en3.jpg.html)
(http://i183.photobucket.com/albums/x315/Maelstorn/Mobile%20Uploads/0929141252b_zpscxgzok1t.jpg) (http://s183.photobucket.com/user/Maelstorn/media/Mobile%20Uploads/0929141252b_zpscxgzok1t.jpg.html)
-
If yours does get hot install a belly pan and seal up those gaps around the radiator.
-
Thank you LOF, I'll be sure to do that. I also want to do something similar to FC3S Murray and cover up top around the intake too.
-
My Hinson is for sale, build for an FC
http://www.norotors.com/index.php?topic=20465.msg267143#msg267143 (http://www.norotors.com/index.php?topic=20465.msg267143#msg267143)