NoRotors.com - RX7 Engine Swap Forum

Technical Information => Drivetrain => Topic started by: Berto on July 12, 2010, 11:06:52 PM

Title: Polyurethane Pinion Snubber
Post by: Berto on July 12, 2010, 11:06:52 PM

So I was out at the store and found these polyurethane bump stops.  I want to see how similar these are to the 'Help' bump stops that everyone else uses on FCs.  Could someone post up how long the 'help' snubber is?

Here is a pic with the box and a measuring tape for posterity.
(http://i27.photobucket.com/albums/c192/BertoBizkit/RX-7/LS1%20Swap%20into%20the%20RX-7/DSC03542.jpg)

Title: Re: Polyurethane Pinion Snubber
Post by: bikedad on July 13, 2010, 12:01:18 PM

Here's a pic with my snubber in my hand....  :D (Yea, it's funny)

I need to trim the tip off because it's too long and slides to the side. (I haven't done that yet)
Yours looks like it might work better.

(https://www.norotors.com/gallery/albums/Misc_Pictures/Dir_1/medium_823.JPG) (http://www.norotors.com/index.php?action=gallery;sa=view;id=823)

Here it is with the pre-load.

(https://www.norotors.com/gallery/albums/Misc_Pictures/Dir_1/medium_824.JPG) (http://www.norotors.com/index.php?action=gallery;sa=view;id=824)

Title: Re: Polyurethane Pinion Snubber
Post by: Berto on July 13, 2010, 12:25:27 PM

Well....I have two and only need one so if you want a poly urethane snubber let me know, we can work something out!