NoRotors.com - RX7 Engine Swap Forum

Technical Information => Suspension/Brakes/Wheels => Topic started by: rxweelo on March 14, 2012, 06:21:44 PM

Title: power steering rack fitting sizes
Post by: rxweelo on March 14, 2012, 06:21:44 PM

Guys just wanted to check or see if any of you have seen or have a power steering rack that has 12mm-1.5 for the supply and 16mm-1.5 for the return?  Was looking at ordering some fittings but the typical two 6an to 16mm-1.5 fittings for the rack connections will not work for me.  Looking at other post it looks like the two 16mm fitting is the norm, do I have a strange rack?  Its a 93.  Thanks!

Title: Re: power steering rack fitting sizes
Post by: Plex on March 16, 2012, 04:29:05 AM

Mine is the same as yours, required an M12x1.5 for the pressure side and an M16 return