NoRotors.com - RX7 Engine Swap Forum

Technical Information => Suspension/Brakes/Wheels => Topic started by: 87dumpsterfc on February 29, 2012, 12:16:28 PM

Title: fc 4 piston brake conversion question
Post by: 87dumpsterfc on February 29, 2012, 12:16:28 PM

Ok, my fc had the single piston brakes, I did a 5 lug and 4 piston caliper conversion. I just got my new brake line for the fronts, and it doesn't have a male end on it. Do the 4 piston fc's (s4) have a hard line between the caliper and the soft line? And if so is it m10x1.0?

Title: Re: fc 4 piston brake conversion question
Post by: theantirotor on February 29, 2012, 02:30:20 PM

Yes there is a short hardline between the caliper and the soft line.  I am nearly positive it is m10x1 on both ends.

Title: Re: fc 4 piston brake conversion question
Post by: DDv8 on February 29, 2012, 09:13:19 PM

m10x1  male both ends, goes between caliper and bracket on strut.