Fd water temp and oil pressure part numbers

[fearnopiston]

Figured this may help some people on here, all the fitting part numbers to make your coolant temp and oil pressure gauges In your cluster work.

The coolant temp sender can be bought of rockauto.com for 6.77 plus shipping and the oil pressure sensor is 40.79 on there plus shipping. The fittings/adapters end up being about 36 bucks plus shipping, hope this helps.

-Chance

Coolant temp sender part number:BECK/ARNLEY Part # 2011220   
Oil pressure sensor part number: STANDARD MOTOR PRODUCTS Part # PS193   

  Www.speedwaymotors.com for the adapters:

[MeFryRice]

This was very helpful as I broke the connector on my coolant temp sensor.  I was able to find it on Amazon and placed an order for it.

[kens33ls]

Anyone know what might be the problem with my stock FD oil pressure gauge. I put a mechanical gauge on the LS,and it ead 45#.  I tun the key on and breifly touched the O.P. wire to ground and the gauge jumped all the way up. I checked the sender by hooking it up to my compressor with 20# of air and with an olhm meter on it,I gradually increased the air and the olhm meter gradually moved with the air.  The gauge will not move with the wire hooked to it? I would appreciate any replys.  kenscar33ls.

[ls3_rob]

thanks

[Focuzed-REX]

which parts do i need for just the oil pressure stuff?

[BLACK_7_6.0]

will these work with LS3 Cylinder heads as compared to Cathedral heads? Are the ports used for the sensors/adapters all the same throughout the LS series?

i think the LS3's threads are 12MM ? i know this is an old thread but nobody answered my question on my thread.

[scuter83]

Works for all LS heads.  In the description they list LS1 LS2 LS3 LS6 LS7.